Airsoft
There are 1414 products.
Perun V2 Lightning ETU Optical Processor Unit (Rear Wired)
In stock
The Perun V2 Lightning ETU with rear wiring is a next-generation optical and magnetic processor unit featuring an integrated MOSFET for Tokyo Marui standard Version 2 gearboxes. Eliminates mechanical contacts, provides adaptive trigger calibration, supports precocking, active braking, voltages up to 17V, and full compatibility with brushed and BLDC brushless motors. Pre-soldered with a T-Deans plug.
64.90 €
Perun V2 Hybrid Optical ETU MOSFET (Front Wired)
In stock
The Perun V2 Hybrid (front wired) is an advanced optical and magnetic electronic trigger unit (ETU/MOSFET) designed for Version 2 gearboxes with front-routed wiring setups. Replacing mechanical trigger contacts and cut-off levers, it delivers frictionless reliability, 5-level adaptive trigger sensitivity, precocking, binary fire, active braking, and DSG capability. Fully programmable via trigger inputs across 7V to 17V battery systems.
89.90 €
Magpul M-LOK MVG Vertical Grip
In stock
Streamlined M-LOK MVG Vertical Grip by Magpul designed for direct mounting onto M-LOK slots on aluminum or polymer hand guards. Improves firearm control, recoil management, and target transitions.
35.50 €
Novritsch SSX10 Spring & Screw Set
In stock
A complete Spring & Screw Set specifically designed for the Novritsch SSX10. This essential spare parts kit contains all the replacement springs and screws needed to keep your airsoft replica in top working condition for years to come.
18.50 €
Maintenance Kit Gen3
In stock
The Third Generation Maintenance Kit (Gen3) includes everything you need to clean, lubricate, and maintain your airsoft replicas and tactical gear. Packed in a convenient transport case, it features upgraded tools, oils, and precision cleaning accessories.
35.00 €
WADSN 45° Offset Picatinny Light & Optic Mount
In stock
The WADSN 45° Offset Light & Optic Mount is an ultra-compact, low-profile mounting solution designed for standard 22 mm Picatinny rails. Standing just ~4 mm high from the rail base, it features a 5.5 cm 4-slot Picatinny rail section that can be repositioned across 4 different mounting holes. Perfect for mounting secondary micro red dot sights on DMR/SPR rifle setups for close-quarters engagement or positioning tactical flashlights at an ergonomic angle.
45-Degree Cant Angle: Positions backup optics or flashlights off to the side without blocking primary scopes.
Ultra-Low Profile: Sits extremely close to the handguard at approximately 4 mm in height.
4-Position Adjustability: The 5.5 cm 4-slot rail segment can be mounted centered, forward, or rearward on the base bracket.
Universal Rail Mount: Secures firmly onto standard 22 mm RIS / Picatinny rail systems.
45-Degree Cant Angle: Positions backup optics or flashlights off to the side without blocking primary scopes.
Ultra-Low Profile: Sits extremely close to the handguard at approximately 4 mm in height.
4-Position Adjustability: The 5.5 cm 4-slot rail segment can be mounted centered, forward, or rearward on the base bracket.
Universal Rail Mount: Secures firmly onto standard 22 mm RIS / Picatinny rail systems.
21.90 €
Mancraft MMR HPA Micro Regulator with EU Connect (60-250 PSI)
In stock
Ultra-compact and ultra-consistent Mancraft MMR (Mancraft Micro Regulator) HPA regulator machined from solid 7075 T6 aluminum, fitted with an EU Connect male quick-disconnect fitting. Delivers 60–250 PSI (4–15 bar) output with an oversized 4.5 mm piston bore for instant refresh rates. Complete with integrated pressure gauge, built-in tournament lock, and Mancraft's lifetime warranty. 100% made in Poland.
159.90 €
Metal One O'Clock Offset Picatinny Mount
In stock
Machined from high-strength aluminum alloy, the Metal One O'Clock Mount is a dedicated offset rail designed for standard Picatinny platforms. Its 1 o'clock offset geometry expands mounting real estate, allowing operators to run secondary backup optics, weapon lights, or laser designators tight against the primary sightline.
10.90 €
Soger Cyclone Rotated Regulator 4500 PSI LP Output 450 PSI
In stock
High-performance Soger Cyclone Rotated regulator engineered from premium aluminum for 300 bar / 4500 PSI compressed air (HPA) tanks. Features a dedicated Low Pressure (LP) output of 450 PSI, a fully rotatable fill nipple for customized wrist clearance, and dual head O-rings for complete air sealing. Includes Allen key.
75.90 €
Field CO2 On/Off Tank Valve (5/8-18UNF, 125 Bar, 3k Disc)
In stock
Heavy-duty Field CO2 On/Off cylinder valve engineered for paintball and tactical CO2 bottles. Features a smooth manual On/Off knob to control gas delivery, a 3K (3000 psi) safety burst disc, and a standard 5/8-18UNF neck thread. Rated for 125 bar operational pressure.
12.90 €
MDE 7 Liter Cylinder Rubber Boot (140mm)
In stock
Heavy-duty rubber cylinder boot by MDE designed for 7-liter diving, PCP airgun, and tactical air charging bottles with a 140 mm diameter. Provides a flat, self-standing base that keeps cylinders upright, preventing accidental tipping, scratches, and floor damage.
16.95 €
Tuxing TX15 PCP Cylinder Fill Adapter M18x1.5 300 Bar
In stock
Precision stainless steel Tuxing TX15 PCP fill station adapter engineered for cylinders and cartridges up to 300 bar working pressure. Features dual pressure gauges, an integrated flow-control pressure reducer, an emergency decompression valve, a bleed knob, and an 8 mm quick-disconnect fitting (M18x1.5 thread).
79.95 €
SHS V2 Gearbox Switch Assembly / Trigger Contacts
In stock
The SHS V2 Gearbox Switch Assembly is a high-quality replacement trigger contact set designed for Version 2 airsoft gearboxes. Engineered with a specialized protective coating, it ensures smooth electrical conductivity, reduces battery drain, and significantly extends the lifespan of your trigger contacts.
High-Conductivity Coating: Features a micro-thin protective layer for optimized electrical flow and minimal resistance.
Extended Longevity: Resists arcing and wear to provide long-lasting durability under high-frequency usage.
V2 Compatibility: Precision-molded drop-in replacement part designed for standard Version 2 AEG gearboxes.
High-Conductivity Coating: Features a micro-thin protective layer for optimized electrical flow and minimal resistance.
Extended Longevity: Resists arcing and wear to provide long-lasting durability under high-frequency usage.
V2 Compatibility: Precision-molded drop-in replacement part designed for standard Version 2 AEG gearboxes.
4.90 €
SHS Metal Firing Selector Switch for M4 AEG
In stock
The SHS Metal Firing Selector Switch for M4 AEG is a durable, high-quality replacement upgrade part designed for M4/M16 series airsoft rifles. Precision-machined from robust metal, it ensures crisp selector clicks and long-lasting reliability under intensive field use.
Durable Metal Construction: Crafted from high-strength metal to resist wear and prevent stripping over time.
Precise Fit & Function: Engineered for smooth rotation and distinct firing mode indexing.
Direct M4 Compatibility: Standard replacement part designed to fit most M4/M16 AEG lower receiver platforms.
Durable Metal Construction: Crafted from high-strength metal to resist wear and prevent stripping over time.
Precise Fit & Function: Engineered for smooth rotation and distinct firing mode indexing.
Direct M4 Compatibility: Standard replacement part designed to fit most M4/M16 AEG lower receiver platforms.
3.90 €
CAA Tactical MVG Short Forearm Vertical Grip
In stock
The CAA Tactical MVG Short Forearm Vertical Grip is a compact, ergonomically designed forward grip built to enhance firearm control and recoil management. Constructed from high-strength molded polymer, it features rubberized front and back contact surfaces for a secure, non-slip hold in any operational environment.
Tool-Less Installation: Mounts quickly and securely via a captive thumb nut without requiring additional tools.
Rubberized Comfort Grip: Textured rubber panels on the front and rear ensure a solid, tactile hold even with wet or gloved hands.
Integrated Storage & Mounts: Includes a weatherproof internal storage compartment and removable side mounts for tactical pressure switches.
Tool-Less Installation: Mounts quickly and securely via a captive thumb nut without requiring additional tools.
Rubberized Comfort Grip: Textured rubber panels on the front and rear ensure a solid, tactile hold even with wet or gloved hands.
Integrated Storage & Mounts: Includes a weatherproof internal storage compartment and removable side mounts for tactical pressure switches.
29.95 €
